Tuesday, March 18, 2014

My love, chunky trim

I’m on a mission in our house. A mission to remove all wimpy, skinny trim. I’m talking baseboards and door trim and I haven’t even started with the window trim. We’ve lived hear almost ten years and I’ve barely just begun.

It’s going to be a long, hard fight. So far the wimpy trim is still winning. :)

I’ve completed two rooms – TWO. The mud room and the powder room are done. Small victories. Wait! Three rooms are done, the whole point of this post – the master!

I shared a bit of the new door trim with you a couple weeks ago when I shared the new beefy baseboards I installed over the old ones. But I finally got to finishing it up by filling holes, painting two more coats of white paint and caulking (almost) everything.

Here’s the completed door to our bathroom:

replacing skinny door trim

I’ve blogged about this process before but I thought I’d share a little more detail this time. The doors are all trimmed out in pine wood and I use five pieces to make up the final look.

The two sides are regular 1x4’s, which aren’t 1x4 at all but whatever. One of life’s mysteries. The top is the three more trim pieces. Here’s a side view of the three pieces that make this one up:

craftsman door trim design

There’s a 1x2 on top, then another 1x4 and a small trim piece called “stop” on the bottom. The stop part is what I’ve changed up since the first time I did this. In our powder room I used lattice wood and it felt too thin for me.

You can see here that the stop has a curved edge:

stop

In this room I actually used taller wood for the header – in the pic above it's a 1x4 but because our room is large and the ceiling is high, I went with a 1x6:

replacing door trim

LOVE it.

I avoided doing this for years because I thought it would be so complicated. It’s not at all. I assemble the header on the floor (with a nail gun) and then put it up after the two side trim pieces are installed:

DIY chunky door trim

SO dreamy.

Here’s a look at the double doors:

DIY craftsman door trim

Ignore the sides of the trim – I decided not to caulk until I paint the rest of the room.

I like that the “stop” trim has a little bit of a curve to one side – I think it gives it a little more of a custom look:

DIY craftsman door trimThis one isn’t as easy to appreciate though, since the doors are usually open: 

DIY craftsman door header But the chunky header looks pretty darn good.

Just imagine how great they’ll look with sexy black doors – my other mission. :)

Obviously this is a splurge – it’s not a necessity but I love the look and I think it makes our home feel more “classic” and less “2004 build.” I’ve been doing this slowly over years now and I won’t do every doorway – I doubt I’ll touch the basement for instance. But overall it’s changing the feel of our home and I love it!

Have you tried a similar look in your home? Do you love the classic white craftsman trim as much as I do? It’s not nearly as hard as I thought it would be!

My love, chunky trim Rating: 4.5 Diposkan Oleh: Great Blogger

0 comments:

Post a Comment